EHPro Kayfun Nano Clone Rebuildable Atomizer (RBA) in Stainless
The Kayfun Nano by EHPro offers all the features of the Kayfun Lite Plus
at a smaller size. It is a very durable, stainless steel rebuildable atomizer designed to optimize the flavor of your e-liquid. The wick and wire are housed inside a conical chamber which funnels the vapor straight up for your enjoyment, resulting in greatly enhanced flavor!
The Kayfun Nano has an adjustable center pin and also allows for adjustable airflow control (located at the bottom of the device). This atomizer can hold up to 3ml of e-liquid and has a sealed 510 connection.
The Kayfun Nano is very easy to disassemble. It comes with a removable drip tip. You will also receive extra packets containing wick and wire, spare o-rings, a miniature dual-sided screwdriver (phillips/flat head), AND three extra colored window tubes (blue/green/purple)! These polycarbonate tank tubes offer the convenience of being able to see how much e-liquid remains as well as giving you alternative looks for your device.
This unit does NOT come pre-installed with wick and wire.
Size:Height (with drip tip installed): 64.5mm (2.54")/Diameter : 22mm (0.86")
Please Note: This item does not come with an instructional manual and is not intended for inexperienced users.
Warning on rebuildable atomizers, reprinted from the ECF website:
Please note very carefully that rebuildable atomizer coils and wicks have known risks.
Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.
1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it may damage the device it is used on.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV such as a Silver Bullet, that will not be destroyed by a short circuit.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.
7. These items have inherent risks and may go faulty at any time even if they were originally in good working order. The owner bears the cost of equipment damaged as a result.
Due to the nature of this product, we cannot offer warranty, exchange or returns. This product is for experienced users and requires technical knowledge in order to properly use it.
8. RAs, RDAs or RBAs must only be used on equipment that cannot be seriously damaged or harm the user. In practice this could mean an electrical device with a hot spring (fuse) or an electronic device that will not activate if there is a short-circuit (a dead short). Unfused devices or unprotected electronic devices will suffer damage when used with a faulty RA or RTA.