Order Toll Free 727-697-7316
Everything you need to get the job done.
Welcome, Guest | Login
WARNING: This product contains nicotine. Nicotine is an addictive chemical.

Eleaf iStick TC60W Kit - Black

Eleaf iStick TC60W Kit - Black
Compact size and lets you switch easily between Variable Watt and Temperature Control mode

Part Number:

DISCONTINUED-Eleaf iStick TC60W Full Kit-blk frame-blk


Not for Sale
Your Price:$59.99

Choose Options

Make it a Kit! Save $$$
(1) Efest Purple IMR18650 3100mAh 20A High Drain Battery-flat top [+$10.99]
(1) Extra Efest Purple IMR18650 3100mAh 20A High Drain Battery-flat top [+$10.99]
Mini 1A Wall Adapter [+$4.95]
Trustfire TR-001 Dual Battery Charger -black [+$9.50]

Eleaf iStick TC60W, Variable Watt/Temperature Control Kit in Black

Eleaf iStick TC60W Kit with Melo 2 AtomizerThe Eleaf iStick TC60W is a Variable Wattage and Temperature Control mod.

A chief benefit of Temperature Control is the ability to avoid burnt or "dry hits" while vaping - this can result from over-heating the coil, or from heating a coil that is dry, due to a low e-liquid level inside the atomizer. In temperature mode, the mod allows you to adjust between 200-600 degrees Fahrenheit (or 100-315 degrees Celsius), and can support the use of Nickel (Ni200) and Titanium wire. In Variable Wattage mode, the iStick TC60W has a 60 watt maximum output.

In addition, the iStick TC60W does not come with a built-in battery. Instead, it offers the convenience of a user-replaceable battery, so you can quickly swap out a drained battery for a freshly charged one as needed. This latest iStick sports a different look, with the atomizer mounted at the center top of the device, rather than at one end along the top. The iStick TC60W retains all the key features the series is beloved for: a small size, an ergonomic design with rounded edges, and user-friendly operation.  

The iStick TC60W Kit also includes Eleaf's Melo 2 Atomizer, changeable coil heads appropriate for vaping in either Variable Wattage or Temperature Control mode, and spare parts.

Using the iStick TC60W

The iStick TC60W has a bright, easy to read OLED screen which displays your output power, temperature setting and mode (TC-Ni or TC-Ti), atomizer resistance, and battery life at a glance. The iStick TC60W features a stainless steel spring-loaded 510 connection, ensuring that virtually any 510-threaded atomizer will make a secure connection with the device. The iStick TC60W can accommodate atomizers with a diameter up to 26mm with no overhang, including the Aspire Triton (22.5mm) or Kanger Subtank Plus (25mm).

Using the iStick TC60W is easy. To turn the unit ON or OFF, press the square Power button on the side of the mod 5 times in quick succession. To switch between Variable Wattage (VW) and Temperature Control (TC-Ni or TC-Ti) mode, long press the Menu button (the smallest button). The display will cycle through all 3 modes - release the button when you have reached your desired mode.

In Variable Wattage (VW) mode, pressing the elongated Adjustment button (above the Menu button) on the upside or downside will increase or decrease the wattage in 0.1W increments. Wattage will increase/decrease slowly at first - to adjust at a constant high speed, long-press. Your selection can be Locked to prevent accidentally changing your watt setting by simply holding down both ends of the elongated button simultaneously for 2 seconds. The iStick TC60W can be Unlocked the same way when you need to adjust your wattage setting again.

In Temperature Control mode (TC-Ni or TC-Ti), adjust temperature up or down by pressing the upside or downside of the Adjustment button. Long-press to adjust at a constant high speed. To adjust your wattage output while in temperature mode, keep pressing the Menu and the upside (or downside) of the Adjustment buttons simultaneously to increase (or decrease) wattage. To Lock in your atomizer resistance in temperature mode, press the square Power button and upside of the Adjustment button simultaneously for 2 seconds. A small lock symbol will appear next to your atomizer resistance on the OLED screen (when Unlocked the same way, the lock symbol will be replaced by an ohm sign.) Please lock the resistance when the atomizer coil is at room temperature, so that the mod can display the correct "base resistance".

In Lock mode, when you remove the coil and then put it back, the mod can maintain the same "base resistance", although the coil resistance may increase due to the rise in temperature. In Unlock mode, when you remove the coil and then put a coil back, the screen may display "New coil up same down", as the coil resistance may increase within a certain range. If it is the same coil, press the downside of the Adjustment button. If it a new/fresh coil, press the upside of the Adjustment button. Please always Unlock the atomizer resistance before changing out to a coil head with a different resistance.

The iStick TC60W features ventilation holes at the bottom to ensure appropriate heat dissipation. The mod uses 1 x flat top 18650 High Drain IMR battery. Please only use High Drain batteries with a high amp limit (minimum 20A) in this device. To insert the battery, remove the magnetic battery back cover, and insert the battery cell over the ribbon with the negative pole pointing down. The cell will fit snugly inside the device, but it is easy to remove by pulling on the ribbon inside the cell compartment. 

When your battery's remaining power is less than 10% and needs to be charged, the battery icon on the OLED screen will flash. You may replace the battery with a freshly charged one. Or, you may choose to take advantage of on-board charging, and charge your battery while it is still inside the device. To do so, plug the included micro USB charge cable into the micro USB port on the bottom of the device, and then plug into your computer, OR into a wall adapter and into a wall outlet. The battery icon on the OLED screen will continue flashing while the battery charges, and the OLED screen will go out once the battery is fully charged. You can also take out the battery and choose to charge it separately with an appropriate Li-Ion battery charger. Please note: Unlike other iSticks, the iStick TC60W is not advertised as a Pass-through device, so we do not recommend vaping and charging at the same time. Choose the Make It a Kit option to get High Drain batteries, a Li-Ion battery charger, and/or a wall adapter at a discounted price!

Using the Melo 2 Atomizer

Eleaf Melo/Melo 2/iJust 2 Replacement EC Coil HeadThe included Melo 2 is a convenient top side-fill atomizer, which makes refilling a breeze. It has 4.5ml e-liquid capacity. It is made of stainless steel, with a sturdy pyrex glass tube, ensuring the tank can handle harsh e-liquids without fear of damage. The Melo 2 features adjustable airflow control with two cyclops airflow holes to achieve maximum vapor production, without sacrificing flavor. To adjust airflow, simply spin the control ring along the bottom to your preferred setting.

Filling the Melo 2 is quick and easy, since you do not have to take it off the iStick. First, close-off the airflow along the bottom by spinning the control ring until the airflow holes are fully closed (if you skip this step, the Melo 2 will not be able to create an adequate air seal, and the atomizer may leak.) Next, spin the control ring at the top cap to expose the liquid fill-hole. Tilt the Melo 2 at a slight angle, and fill with your favorite e-liquid (do not over-fill.) When finished, spin the ring again to close the liquid fill-hole. Adjust the airflow along the bottom to your desired setting, and resume vaping.

Changing the coil is also easy. Simply unscrew the bottom/base, unscrew the coil head, and screw in a new one. If using a fresh coil, always prime it by dripping a few drops of e-liquid onto the exposed cotton, and set the atomizer aside for a few minutes - this will ensure that your coil is properly saturated and will not burn. 

The kit comes with three kinds of EC coil heads: a regular kanthal coil (white band), a Nickel 200 (TC-Ni) coil (blue band), and a Titanium (TC-Ti) coil (red band).

Temperature Control requires the use of Titanium or Nickel coils. Always use a coil head appropriate for the mode you are using on the iStick TC60W. The regular kanthal coil is intended for use in Variable Wattage mode only. Use the TC-Ni coil in temperature TC-Ni mode, and the TC-Ti coil in temperature TC-Ti mode. When using the TC-Ni/TC-Ti coils, we recommend starting out at a low temperature setting, and increasing gradually. Please note: When using a new coil with the Melo 2 in temperature mode, make sure the coil is at room temperature. 

The included EC coils use 100% organic cotton as wicking to deliver pure, clean flavor from your e-liquids.

The Eleaf iStick TC60W Kit is an excellent, budget-friendly introduction to Temperature Control vaping! Its compact, ergonomic design makes this device very comfortable in the hand. And, with a removable battery, it means you never have to wait for your battery to charge - just swap out a drained battery for a freshly-charged one. The Melo 2 atomizer is a perfect match for the iStick TC60W. The included coil heads allow vapers to experience Variable Wattage and Temperature Control vaping as easily as changing out a coil head. With its top fill design, refilling the Melo 2 is quick and mess-free. The iStick TC60W features all standard protections like Short Circuit, Low Voltage, and more. 

The Eleaf iStick TC60W Kit Includes: 

1 x iStick TC60W mod (High Drain Battery not included)
1 x Melo 2 Atomizer (0.3 ohm kanthal EC coil / use in VW mode only, 30-80W range)
1 x EC TC-Ni coil (0.15 ohm / use in TC-Ni mode only)
1 x EC TC-Ti coil (0.5 ohm / use in TC-Ti mode only)
1 x Micro USB charge cable
4 x Spare silicon rings
1 x iStick TC60W User Manual
1 x Melo 2 User Manual
1 x Nice display box to keep in when not in use

Eleaf iStick TC60W - Length 90mm (3.54") / Width 38mm (1.49")  / Diameter ~26mm (1.02")
Eleaf Melo 2 - Height (with drip tip) 61mm (2.40") /Diameter 22mm (0.86")

Our standard 30 day warranty covers defective product.
5 Stars
Eleaf istick tc 60w
Such a great device it has all the power I need at a great price. I use the device with the playboy vixen and it powers it just fine.
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by:  from Sioux Falls . on 12/4/2015

Reward Points

60 points will be rewarded to you when you buy this item.

Related Items

Recently Viewed Items

Your #1 Source for Electronic Cigarettes, Premium USA-made Natural E-Liquids, Vaping and E-Cig Supplies, Mods, Sub-Ohm Devices, Variable Watt APV's by Smoktech, Kanger, Innokin, eLeaf, GS, Aspire, JoyeTech and more.
Breathe Life, Your Way SmokTek.com, #1 source for electronic cigarette supplies, premium vaping e-liquids and accessories.

SmokTek is Your #1 Source for Electronic Cigarettes, Advanced Personal Vaporizers, Mods, Sub Ohm Devices, E-Cig & Vaping Supplies and SmokEjuice Premium USA-made Natural E-Liquids! We carry only top quality brands such as SmokTech, Kanger, Innokin, Aspire, Greensound, EHpro, Tobecco in store and online.

We're here to help you quit smoking, folks!
From beginners to cloud-blowing advanced users, we provide courteous help and quality product you need to succeed. Our website provides a huge selection, super fast same-day shipping and 5-Star customer service (based on over 39,000 reviews).

Established in 2011, SmokTek LLC was founded as a result of a life-changing event, I quit smoking cigars after 35 years! I did it because I decided to try the E-Cigarette to see what the hype was about. After getting a good one (not the cheap disposables) and a few flavors of e-liquid, I was amazed at how my cravings subsided. I had my last cigar 4 days after starting vaping! True story folks, this is truly a wonderful thing to experience for yourself!

Shopper Approved Seal, 5-Star Reviews of SmokTek.com
Visit SmokTek.com on the E-Cigarette-Forum for some great discussion on Personal Vaporizers
CASAA fights for vapers. We support CASAA.
SmokTek.com Ranked #1 E-Cig Site
Click for company profile