RTA System for Aspire Triton
The Aspire Triton RTA System is designed for the Aspire Triton Top-Filling tank. The RTA system is easy to use, and allows users who enjoy building their own coils to transform the Triton tank into an RTA.
1x Upper, Middle, and Lower Hardware (with screw)
1x Pre-built Coil
1x Packet of Organic Cotton for Wicking
3x Spare screws
4x Spare o-rings
1x Spare rubber grommet insulator
1x Mini Screwdriver
1x Instructional Guide
1x Suggested Specification Chart for Triton RTA Coil
1x Compact tin case to keep spare parts in
The RTA System does not come pre-assembled or pre-installed with wick and wire.
Price is for one Aspire Triton RTA System.
Please note: This item is intended for experienced users, and requires the use of an ohm meter and technical know-how. Please only use sub ohm coils with devices capable of handling sub ohm builds. If using a mechanical mod, only use High Drain batteries with a high amp limit; if using a variable power/regulated mod, please use High Drain batteries in a device capable of putting out 20W or higher. NEVER use sub ohm coils on an eGo battery or a device unequipped to support sub ohm coils. It is for your safety!
To ensure your build does not burn, make sure to prime by saturating the cotton with e-liquid before use.
Due to the nature of this product, there is no warranty, returns or exchanges.