Variable Voltage:
Voltage can be adjusted from 3.0 – 6.0 volts in .1 volt increments.
Variable Wattage:
Wattage can be adjusted from 6.0 – 15.0 W in .5 watts increments.
Ohms meter:
The iTaste VV4 features automatic real-time atomizer Ohms detection.
Puff Counter:
The puff counter will record how many puffs you have taken. Press the "+" and "-" buttons to view your puff count.
Short Circuit/Atomizer Protection:
Short Circuit/Atomizer Protection helps protect the iTaste VV4 against faulty atomizers. If the resistance of the atomizer is lower than
0.8 ohms, the Ohms bar will blink. If there is a short circuit, the screen will display the following and the LED light will power off.
Over-Discharge Protection:
The iTaste VV4 monitors the battery voltage and will automatically turn off when the battery is discharged.
LED Battery Indicator:
The iTaste VV4 battery utilizes an advanced capacity display via green, yellow and red LED lights. Users will know the battery’s capacity via the color of the LED Button. The LED lights will show green, yellow or red to indicate full battery life, half capacity or charging needed.
Superior Battery Life:
The iTaste VV e-cigarette features a built-in 1000 mAh polymer Li-Ion rechargeable battery.
510/eGo Threaded:
The iTaste VV4 is threaded to accept 510/eGo threaded accessories, and features a spring-loaded 510 pin to ensure all of your atomizers fit flush. It works great with the
iClear16,
iClear30S,
iClear30B clearomizers and many others!
ON/OFF Battery Switch:
Quickly clicking 3 times will power the device on or off. Once the device is on, holding down the button will activate the battery. This safety feature prevents the atomizer from turning on while it's in your pocket or bag, as well as inadvertent settings changes.
10-Second Cutoff:
If the button is held down for 10 seconds or longer, the iTaste VV4 will shut itself off until the button is released.
Pass-through:
The iTaste VV4 is charged through the Micro USB Port on the bottom. You can recharge it with the included Micro USB cable and a computer USB port or with a
wall adapter. It can also work as a
pass-through device for simultaneous vaping and charging.
Settings Retention:
The device remembers the last voltage or wattage used.
Display Information:
The bright, easy to read display shows resistance (ohms), voltage output, wattage output, and battery life.
0
