Joyetech Cubis Top-Filling Clearomizer Tank in Black DISCONTINUED
The Cubis is the latest
top-filling clearomizer by Joyetech.
The Cubis is very innovative, with several outside-the-box features we haven't seen before. The unique two-piece design and the use of hidden adjustable airflow at the top, make the Cubis the closest thing to a truly no-spill, leak-proof atomizer you are likely to find.
The Cubis has 3.5 ml e-liquid capacity and a pyrex glass tank. Adjusting airflow is easy: just grip and spin the top cap. Spin clockwise to open up airflow, or counter-clockwise to close it off.
The Cubis is a top-fill tank, meaning you do not have to remove the tank and unscrew the base each time you need to refill. To fill with e-liquid, simply grip the top cap, and unscrew. You will notice that the chimney and coil will come out as one solid unit, leaving behind just the "cup"-like tank and base. Grab your favorite e-juice and fill to the MAX line designated on the outside of the tank. Please do not overfill. Now take the top piece, insert it back into the tank and screw back securely. You are ready to vape!
The Cubis comes with 3
changeable coil heads. One is a
kanthal BF Clapton coil (1.5ohm), perfectly suited for mouth-to-lung vapers. Two are
stainless steel BF (SS316) coils (0.5ohm and 1.0ohm), designed for lovers of direct-lung/sub ohm vaping. The use of stainless steel means that you can use these coils with both your regular variable wattage devices
and temperature control mods with a SS316 option/mode (like the
Joyetech Cuboid 150W mod, pictured on the right). A great feature of these coils is that they do not require a lot of power to perform, which means your battery will last longer. Both kinds of coil heads yield
excellent flavor and vapor production!
Nickel (Ni) coils are also available
here.
Changing the coil is very easy, and just like when refilling with e-juice, you no longer have to remove the tank from your device when you need to change the coil. Grip the top cap, unscrew and pull out the top section. Unscrew the old coil from the bottom of the chimney, and screw in a fresh coil.
Please note: Any time you use a new coil, always set the Cubis aside for a few minutes, so the cotton wicking inside the coil has a chance to completely saturate with e-liquid. This will ensure that the coil will not burn when you fire your device. If you experience any gurgling noises after doing this, do not be alarmed. Gurgling noises are normal and indicate the coil is a little over-saturated - to eliminate gurgling, install the Cubis on your device, and vape it a few times while holding your device
upside-down.
The Joyetech Cubis is 510-threaded and has a 22mm diameter - it will sit flush and look great on most 510-threaded mods.
Whether you are a mouth-to-lung or direct-lung vaper, if you are looking for a leak-proof, easy-to-use, top-fill clearomizer, you must try the Cubis!
Features:
- Quick and Easy Top-fill
- Unique "Cup" Design
- Hidden Adjustable Airflow Control at the top
- Kanthal and SS316 Coils
- Great for mouth-to-lung or sub ohm vaping
- 510 connector
- Stainless Steel construction
- Pyrex Glass Tank for protection from harsh liquids
- Capacity is 3.5 ml
Includes:
1 x Cubis tank (does not come pre-installed with a coil)
1 x kanthal BF Clapton coil (1.5 ohm / 8-20W range)
1 x stainless steel BF SS316 coil (0.5 ohm / 15-30W range)
1 x stainless steel BF SS316 coil (1.0 ohm / 10-25W)
1 x spare Delrin drip tip (clear)
1 x cap (for converting the Cubis into an e-juice container)
1 x Instructional Manual, Warranty Card, and Coil Using reference card
1 x Packing box to store the tank when not in use
PLEASE NOTE: Please only use the included sub ohm coil with devices capable of handling sub ohm vaping! If using a mechanical mod, please only use High Drain batteries with a high amp limit; if using a variable power mod, please use High Drain batteries in a device capable of putting out 20W and higher. NEVER use sub ohm coils on an eGo battery or a device unequipped to support sub ohm coils - it is for your safety! If you decide to use the included SS316 coils on a temperature control device, please make sure that you have selected the approriate SS316 mode on that device. Do not use the included kanthal coil with temperature control devices. Please take the time to read the included Instructional Manual on the proper use of this unit.
Dimensions: Height 60mm (2.36") / Diameter 22mm (0.86")
Tips:
- Gurgling noise: This is a sign that there is too much liquid in the coil head, and usually occurs after a refill. To minimize the chance of this occurring, after a refill, use a paper towel to wipe off any excess juice from the threading on the tank, cap and chimney of the Cubis. If gurgling occurs, fire the Cubis while holding your device upside-down. After a few inhales this way, the gurgling should disappear.
- When possible, keep the tank full and never below 1/3 full of eLiquid ("topped off"). This helps maintain the "vacuum" in the tank and keeps the coil wet, so it does not burn.
- Atomizer heads have an average lifespan between 10 to 20 days, depending on usage. When the atomizer head wears down, it may begin to leak, and vapor/flavor production begin to noticeably decrease. Replace the atomizer head with a new one if available.
Please note: Due to the nature of atomizers, we cannot offer warranty, exchange or returns except if DOA.
0
