The kit includes two 320mah batteries with 5-click On/Off manual operation and a recessed fire button with a white LED ring. The batteries are 510 threaded and have a regulated output of 3.4V to ensure consistent performance throughout. Other features include 15 second safety cut-off: the battery will shut off automatically if the button is pressed for more than 15 seconds.The Kanger E-smart 510 BCC kit is a fantastic kit for beginners, as well as anyone looking for a sleek, inconspicuous device for going out and about! The Kanger E-smart may even surprise veteran vapers - read more about why over on our blog by clicking here.
The E-smart 510 BCC Kit comes with two 1.8 ohm bottom changeable coil clearomizers with 1.2 ml capacity. They are very easy to fill! Simply unscrew the base, tilt the clearomizer at a slight angle and drip e-liquid down against the outer wall of the clearomizer (be careful not to fill with e-liquid down the center tube, as it will leak out of the bottom of the clearomizer and/or mouthpiece!) Replacing the coil is also easy: E-smart coils are fused with the base of the clearomizer, so simply unscrew the base and replace with a new E-smart 510 coil!
To charge the battery, simply screw the battery onto the included USB charge cable and into any USB port, OR if using with the included wall adapter, plug into a wall outlet. The LED light on the charger will turn from RED to GREEN once the battery is fully charged. Please do not over-tighten the battery when screwing onto the USB charge cable. NEVER use cell phone chargers/adapters with the battery - it may cause an explosion or fire. Never leave battery charging unattended. Remove from charger once the battery is fully charged to prevent any damage.
Features