Zenith V2 Rebuildable Dripping Atomizer now at SmokTek
Posted by Marina on 12/16/2014 to
New Items at SmokTek.com
Zenith V2 Clone Rebuildable Dripping Atomizer - Brass or Black
The Zenith V2 is a rebuildable dripping atomizer made of stainless steel with a brass - or black - airflow control ring. Like the Plume Veil, this is a very user-friendly RDA. The Zenith V2 is great for dual or quad coil builds. Instead of holes, the posts have slots, which make it very easy to fit your leads through each terminal. Additionally, the Zenith V2 uses an Allen key to adjust the screws to pin down your wire, eliminating any worry about stripping screws over time. This rebuildable atomizer also features a delrin insulator, designed to keep your drip tip cool.
The Zenith V2 has adjustable airflow: three wide cyclops air holes can easily be aligned with your coils by slightly unscrewing the upper part of the top cap and rotating the brass airflow control ring to your liking (screw the top cap down to "lock" in place.)The Zenith V2 has an adjustable brass 510 connection. This RDA is very easy to disassemble - simply grip and pull off the top cap to reveal the build deck. This unit comes with an Allen key, spare o-rings and screws, as well as kanthal wire and silica wick.
This unit does not come pre-installed with wick and wire and does not include a drip tip.
Size: Height 24mm (0.94")/Diameter : 22mm (0.86")
EHPro 26650 Mars 35Watt Mod now at SmokTek
Posted by Marina on 12/12/2014 to
New Items at SmokTek.com
EHPro 26650 Mars Variable Power, 35Watt APV - Stainless
The 26650 Mars by EHPro is a powerful, reliable Variable Wattage mod which allows you to easily adjust wattage between 7-35W in 0.1W incremenents. This APV is massive, but feels great in the hand and is easy to use. It is made of stainless steel with a polished finish.
The 26650 Mars features an adjustable 510 connector, ensures that any atomizer you put on it will fit flush. With up to 35W of power, this APV is able to run a nice variety of devices, fromClearomizers and Clearomizer Tanks to Rebuildables.
The 26650 Mars has an easy to read LED screen and unique motion-activated operation: a motion censor inside the control head allows you to adjust watts by tilting the device left or right. The LED screen displays your watt/volt output, atomizer resistance, battery life and battery voltage at a glance! The device can be Locked to prevent misfires. Additionally, the Mars provides15-second Safety Cut-off, Short Circuit, Low Voltage and Excessive Temperature protection.
This unit uses a single 26650 IMR Battery. We recommend only running High Drain IMR batteries in this device. The bottom cap of the Mars can be twisted to eliminate battery rattle and ensure a secure fit every time.
Please click on "Read More" for more details!
Kanger AeroTank Giant now at SmokTek
Posted by Marina on 12/12/2014 to
New Items at SmokTek.com
Kanger AeroTank Giant, 4.5 ml Bottom Dual Coil Clearomizer (BDCC)
The AeroTank Giant is a bottom dual coil pyrex glass clearomizer with airflow control! Use any juice without damaging the tank! Great new design with a removable tip and a spare stainless steel replacement tube. It is easy to fill and replacing the coil is simple. The AeroTank Giant offers great features and improved performance. The AeroTank Giant has a greater capacity than the AeroTank or AeroTank Mega at 4.5 ml. And, with a diameter of 30mm, it is a great atomizer to use on 26650 mods, like the EHPro 26650 Mars. The airflow control has been redesigned and the coils included with this unit have also been revised so that the wicking system is enclosed. Please note that the AeroTank Giant is compatible with ProTank-3 Upgraded replacement dual coil heads.
The AeroTank Giant is 510 threaded and will work on all 510 threaded devices and Mod's without the need for an adapter.
Please click on "Read More" for full details!
Greensound EGO II Lumia 2200mAh Battery in at SmokTek
Posted by Marina on 12/11/2014 to
New Items at SmokTek.com
GS EGO II Lumia 2200mAh Battery
The EGO II Lumia by Greensound is a large capacity eGo battery with a great look - a golden smoke-like pattern swirls over the base color, while a high quality varnish gives the battery a glossy finish. And, at 2200mAh, this battery will last a long time between charges!The EGO II Lumia battery uses advanced HGB 2200mAh core technology and features 5-click ON/OFF manual operation with a white LED. The LED acts as a Power Level Indicator, alerting you to how much power remains or when it is time to charge the unit: WHITE means 50-100% power remaining, BLUE means 25%-50% remaining, and RED means 1-25% remaining. If the button flashes RED 10 times it means there is 0% power remaining and it is time to charge the battery. Additionally, the EGO II Lumia has an 8-second safety cut-off feature (if the firing button is pressed for more than 8 seconds, the battery will automatically cease firing to prevent any damage.)
Please click on "Read More" for more details!
Greensound EGO II Twist Variable Voltage 2200mAh Battery just in at SmokTek
Posted by Marina on 12/10/2014 to
New Items at SmokTek.com
GS EGO II Twist Variable Voltage 2200mAh Battery
The EGO II Twist by Greensound is a large capacity, carbon fiber printed Variable Voltage eGo battery. At 2200mAh, this battery will last a long time between charges!The EGO II Twist is an advanced eGo battery based on the HGB 2200mAh core battery. Using smart Buck-Boost converter technology, the EGO II Twist allows you to adjust voltage output from 3.3V ~ 4.8V by spinning the knurled dial at the bottom. Regulated voltage output remains stable as the unit is depleted. The battery features 5-click ON/OFF manual operation and a white LED. The LED also acts as a Power Level Indicator, alerting you to how much power remains or when it is time to charge the unit. The EGO II Twist also has an 8-second safety cut-off feature.
Unlike most eGo batteries, the EGO II Twist has a spring-loaded 510/eGo connector which will ensure your atomizers fit flush every time. It works great with 510 and 510/eGo threaded atomizers like the Aspire Nautilus Mini, Kanger Mini ProTank-3 and others. To use with an 808 threaded atomizer, you will need an 808-510 adapter. Each unit comes with a removable beauty ring.
Please click on "Read More" for more details!
Plume Veil RDA in 3 colors now at SmokTek
Posted by Marina on 12/8/2014 to
New Items at SmokTek.com
Plume Veil Clone Rebuildable Dripping Atomizer - Black, Polished Stainless, Copper
The Plume Veil is a rebuildable dripping atomizer with a gold-plated base that is great for both vapers getting into rebuildable atomizers, as well as for veterans who are looking for an easy-to-use dripper!
The Plume Veil has two positive terminals, which makes it easy to build on - when working on a dual coil build, you do not have to labor to fit two leads through a single hole. This rebuildable atomizer also features an adjustable delrin insulator, designed to keep your drip tip cool.
The Plume Veil is a rebuildable dripping atomizer with a gold-plated base that is great for both vapers getting into rebuildable atomizers, as well as for veterans who are looking for an easy-to-use dripper! The Plume Veil has two positive terminals, which makes it easy to build on - when working on a dual coil build, you do not have to labor to fit two leads through a single hole. This rebuildable atomizer also features an adjustable delrin insulator, designed to keep your drip tip cool.
In addition, the Plume Veil offers adjustable airflow that is exceptionally customizable: two cyclops air holes sit on either side of the tank and can be easily aligned with your coils, with the option of additional airflow along the bottom (three small air holes located on either side of the atty which can be closed off completely.) The airflow can be adjusted by rotating the upper part of the top cap. Finally, two small air holes on the top cap can also be opened or closed off by adjusting the delrin insulator (the insulator can be adjusted by inserting a 510 drip tip and twisting up or down.)
Please click on "Read More" for more details!
The Tobeco Coil Tool now at SmokTek - wrap consistent coils with ease
Posted by Marina on 12/5/2014 to
New Items at SmokTek.com
Tobeco Coil Tool
Like the Tobeco Coil Jig V2, the Tobecco Coil Tool is a compact and handy device for vapers who prefer building their own coils.The Coil Tool is easy to use: using the numbered guide on the handle of the tool, simply select your preferred size from five different diameters and begin wrapping until you have achieved the desired number of wraps.
Please note the Tobeco Coil Tool is one solid piece and the graduated posts are non-collapsible.
Diameter of graduated posts: 1.5mm, 2mm, 2.5mm, 3mm, and 3.5mm.
Size: Length 99.9mm (3.93")
Tobeco Coil Jig V2 now available at Smoktek
Posted by Marina on 12/5/2014 to
New Items at SmokTek.com
Tobeco Coil Jig V2
The Tobeco Coil Jig is a handy, compact tool for all vapers who prefer building their own coils! Unlike the original version, this upgraded coil jig has been redesigned so that the tightening screw sits on the side (rather than on top) of the device - this makes wrapping coils much easier.Each coil jig comes with five small coil-wrapping posts with differing diameters, so that you can easily build coils of various sizes. The coil jig features a 510-threaded opening on the body of the unit so that the jig can be used as an atomizer stand while you work on a build. Additionally, the small nut located below the screw on the left side of the device (this side features a protrusion on the top) can be pulled out to reveal a space which can be used to store your preferred post.
Using the jig is easy: simply choose which coil-wrapping post you would like to use, unscrew the screw on the right side of the device (the side which is flat and does not feature a protrusion on top), insert the chosen post into the opening (you may have to exert some force when using the largest size post), and tighten the screw back in so that the post sits firmly in the jig and does not move. Then, take your kanthal wire and wrap one end around the base of the screw lodged on the left side of the jig and begin wrapping your coil onto the post until you have achieved the number of desired wraps.
Diameter of posts included: 0.9mm, 1.5mm, 2.3mm, 3.1mm, and 3.4mm.
The Tobeco Coil Jig V2 is available in several colors.
Size: Length 44.4mm (1.74") / Height (tallest side) 25.2mm (0.99")
Kamry Robot XII aka The Slug Mechanical Mod has arrived at SmokTek
Posted by Marina on 12/4/2014 to
New Items at SmokTek.com
Kamry Robot XII (The Slug) Mechanical Mod (body only)
The Robot XII by Kamry is a replica of the Slug Mechanical Mod. Made out of real wood with antique copper finish accents, this hard-hitting mechanical mod is easy to use and has a very unique appearance! The Robot XII has great conductivity and no voltage drop. It features a spring-loaded 510 connection and uses a distinctive firing mechanism: the firing switch heels back just like pulling back the trigger on a pistol! In addition, the firing switch can be locked to prevent misfires by simply turning the locking screw located directly below it clockwise (to unlock, turn counter-clockwise.) When you first receive the unit, please verify that the screw holding the firing switch in place is tight - if left unchecked, it can result in the screw falling out with use over time. Please take care not to unscrew the locking screw too much as it can become loose and fall out.
The Robot XII runs on a single flat or button top 18650 protected and IMR battery. To use the device, simply unscrew the vented bottom cap at the bottom of the device, take out the brass battery tube, insert your battery into the tube with the negative pole down, and put back into the unit. Screw the bottom cap back on and you are ready to vape.
Choose the Make it a Kit option to get batteries and a charger at a discounted price!
Size: Length 92.4mm (3.64") / Width 30.6mm (1.20") / Diameter 44.8mm (1.76")
Never use non-rechargeable batteries in this or any other e-cig device! Only use the recommended batteries for this unit, it's for your safety.
Aspire Atlantis SUB OHM Replacement Coil Heads are in at SmokTek
Posted by Marina on 12/2/2014 to
New Items at SmokTek.com
Aspire Atlantis Sub Ohm Coil Replacement Head
Available in 0.5Ω (+/- .2) resistance.
These replacement sub ohm coil heads are intended for the Aspire Atlantis sub ohm tank, and are not compatible with the Aspire Nautilus line of clearomizers. In their performance, these coils rival that of rebuildable atomizers, offering incredible pure flavor and tons of vapor! Changing the coil is easy: simply unscrew the base of the Aspire Atlantis, unscrew the old coil and replace with a new one! To fill the Atlantis, hold the unit up-side-down, unscrew the base and fill with 2ml of e-liquid (be careful not to get any e-liquid down the center tube - a needle-tip bottle makes the task effortless.) Screw the base back on and you are ready to vape. (Please allow a few minutes for the e-liquid the saturate the coil if using a brand new coil.)
PLEASE NOTE: For best results and for your safety, we recommend running the Atlantis between 20-30W. The Atlantis should only be used with devices capable of handling sub ohm coils! If using a mechanical mod, please only use High Drain batteries with a high amp limit; if using a variable power mod, please use one capable of putting out 20W or higher. NEVER use this or any sub ohm device on an eGo battery or a device that can not handle sub ohm coils. It is for your safety!
Please click on "Read More" for tips on filling the Atlantis!
Vapeonly vPipe II Bottom Changeable Coil Kit now at SmokTek
Posted by Marina on 11/28/2014 to
New Items at SmokTek.com
Vapeonly vPipe II Bottom Changeable Coil (BCC) Kit
The vPipe II by Vapeonly is a great-looking e-pipe modeled after authentic pipes. The vPipe II is automatic, which means there are no buttons to press each time you want to vape! This beautifully-designed mod feels great in the hand and features a red LED at the top of the bowl, which lights up each time you inhale. The device uses a bottom changeable coil system: the mouthpiece comes off to reveal an atomizer tank (1ml capacity), which houses the coil unit. In addition, the vPipe II offers several kinds of protection, including Short Circuit and Low Voltage protection.
Features:
- Automatic: no buttons to press!
- Bottom Changeable Coil - save money by changing only the coil
- Constant Voltage Output is 3.3V
- Short Circuit Protection: If a short circuit occurs, the LED will flash 3 times, which means the device has no voltage output
- Atomizer Protection: If you vape for more than 10 seconds at a time, the voltage will be cut down automatically and the LED will flash 10 times
- Low Voltage Protection: When voltage is below 3.3V, the LED will flash 10 times and the device will cease operation
- Battery Inversion Protection: If the battery is inserted incorrectly, the unit will not work to protect the circuit from damage
Please click on "Read More" for more details!
Just in at SmokTek - The Aspire ATLANTIS Sub Ohm Tank
Posted by Marina on 11/25/2014 to
New Items at SmokTek.com
Aspire Atlantis, 2ml Sub Ohm Coil, Pyrex (with airflow control)
The highly anticipated Aspire Atlantis offers the benefits of a Rebuildable Atomizer in the shape of a hassle-free replaceable coil tank system! Like the Aspire Nautilus line, it is made of stainless steel with a pyrex glass tank, allowing the use of any juice without fear of damaging the tank. It has 2ml capacity and is easy to fill or replace the coil.
The Aspire Atlantis features the NEW sub ohm coils from Aspire! In their performance, these coils rival that of rebuildable atomizers, offering fantastic flavor and tons of vapor!
Please click on "Read More" for more details!
New Eleaf iStick 20W 2200mAh VV/VW APV Full Kit at SmokTek
Posted by Marina on 11/25/2014 to
New Items at SmokTek.com
Eleaf iStick 20W, 2200mAh VV/VW APV Kit
The Eleaf iStick is a compact, easy to use box mod that fits in the palm of your hand! Small, but powerful, the iStick is an excellent option for those of you looking for a discreet, portable device. The iStick's high capacity 2200mAh lithium-ion battery will last a long time between charges. This mod allows you to adjust wattage between 2.0-20W and voltagebetween 3.0-5.5V in 0.1W/V increments, and has an easy to read OLED screen which displays your output power, atomizer resistance and battery life at a glance.
Features:
- 5-Click ON/OFF, 3-Click to switch between Volt and Watt Mode
- Variable Wattage: from 2.0 - 20.0 W in 0.1 watt increments
- Variable Voltage: from 3.0 - 5.5 V in 0.1 volt increments
- Minimum atomizer resistance is 1.0 ohms and Maximum atomizer resistance is 3.0 ohms
- 10-second Safety Cutoff: pressing the power button for more than 10 seconds will cause the device to shut off. The OLED screen will display "Over 10s"
- Short Circuit Protection: if an atomizer short occurs, the OLED will display "Atomizer Short"
- Low Voltage Protection: if battery voltage falls below 3.3V, the OLED screen will display "Lock." Once the battery voltage is above 3.65V, the low voltage protection will be unlocked
- Low Power Alert: if the battery power is at 10%, the power symbol on the screen will flash
The full kit includes an iStick, micro USB charge cable, wall adapter and eGo-510 adapter. Please click on "Read More" for a full description!
Eleaf iStick 20W 2200mAh VV/VW APV now in at SmokTek
Posted by Marina on 11/24/2014 to
New Items at SmokTek.com
Eleaf iStick 20W, 2200mAh VV/VW APV (body only)
The Eleaf iStick is a compact, easy to use box mod that fits in the palm of your hand! Small, but powerful, the iStick is an excellent option for those of you looking for a discreet, portable device. The iStick's high capacity 2200mAh lithium-ion battery will last a long time between charges.
This mod allows you to adjust wattage between 2.0-20W and voltagebetween 3.0-5.5V in 0.1W/V increments, and has an easy to read OLED screen which displays your output power, atomizer resistance and battery life at a glance.
Features:
- 5-Click ON/OFF, 3-Click to switch between Volt and Watt Mode
- Variable Wattage: from 2.0 - 20.0 W in 0.1 watt increments
- Variable Voltage: from 3.0 - 5.5 V in 0.1 volt increments
- Minimum atomizer resistance is 1.0 ohms and Maximum atomizer resistance is 3.0 ohms
- 10-second Safety Cutoff: pressing the power button for more than 10 seconds will cause the device to shut off. The OLED screen will display "Over 10s"
- Short Circuit Protection: if an atomizer short occurs, the OLED will display "Atomizer Short"
- Low Voltage Protection: if battery voltage falls below 3.3V, the OLED screen will display "Lock." Once the battery voltage is above 3.65V, the low voltage protection will be unlocked
- Low Power Alert: if the battery power is at 10%, the power symbol on the screen will flash
Please click on "Read More" for a detailed description of the Eleaf iStick!
SmokTek eGo Automatic Battery with diamond accent end
Posted by Marina on 11/21/2014 to
New Items at SmokTek.com
SmokTek eGo auto battery - Black or Stainless
These 510 threaded automatic eGo batteries are great for those of you who do not like buttons! With no buttons to push, you never have to worry about misfires or accidentally draining the battery if carried inside your pocket or purse. Available in Black or Stainless in 650mAh or 900mAh size!The battery has a 4-second cutoff and a "diamond" accented end with red LED. It works great with the Kanger E-smart BCC Clearomizer (it looks great with a gold DCT eGo cone), the Vision V. Pure and Redux Clearomizer. Please note that we do NOT recommend using Low Resistance (less than 2.0 ohm) atomizers or cartomizers on this unit! Their use will void Warranty. This battery performs best with single coil atomizers with a resistance of 2.0 ohm or above.
How to charge?
The battery can be charged with our eGo 420ma USB Charger or eGo 450ma USB Charger.
Please Note: To prevent possible damage, eGo batteries should only be charged with an eGo charger. Always fill your cartomizers or other devices while off the battery and check for leakage before using!
If e-liquid gets inside the battery, it will damage it. This will automatically void the Warranty.
Sign Up for Our Newsletter
save 10% on your next order!