New at SmokTek - Efest Purple IMR18650 2500mAh 3.7V 35A High Drain Battery

Efest Purple IMR 18650 2500mAh 3.7V 35A High Drain Battery - Button Top (single)

Safe for sub-ohm and/or microcoil builds. These batteries have been tested for safety under extreme stress.

Safe chemistry LiMN means no risk of venting with flame or explosion. Ideal for use in multiple cell applications.

Please note that due to their inherent safety, IMR cells do not have a protection circuit built in. They should never be discharged below 2.5 volts or cycle life/performance will be reduced. Maximum recommended charge voltage is 4.17V - 4.20V volts. Please check your cells with a volt meter during initial charging to be sure that your charger cuts off below this level, or cycle life will be reduced.

Click on "Read More" for more details!
Read More

New at SmokTek - Savory Pipe SmokEjuice, Premium Organic E-Liquid


Savory Pipe SmokEjuice - Premium Organic E-Liquid, Made in the U.S.A.

Savory Pipe SmokEjuice, Premium Organic E-Liquid A sumptuous, well-balanced blend of tobacco and spices, with hints of clove and cinnamon!

Available in 5 nic levels (including 0 nic) and 3 sizes!


Premium Organic E-Liquid made with the highest quality, USP food grade PG/VG (80/20%) and alcohol based organic  flavorings. Taste the difference!

If you were looking for a new e-juice to use with your pipe mod - like the Kamry K1000 E-Pipe - give this one a try!
Read More

New at Smoktek - AGR Cartomizer Tank - Polished Stainless

AGR Cartomizer Tank - Polished Stainless


The AGR Cartomizer Tank by Youde has been around for a while for a reason - it is a very user-friendly tank, designed for use with Boge cartomizers (standard and XXL sizes), but will work with Smok standard and XL cartomizerswithout a flange. The AGR features polished stainless steel construction and polycarbonate tank tubes, a locking base and hassle-free re-filling!

Click on "Read More" for more details!
Read More

New at SmokTek - PAX-II Dry Herb Vaporizer Kit

PAX-II Dry Herb Vaporizer Clone Kit



The PAX-II kit features an advanced vaporizing system capable of heating dry leaf on-the-go. The kit includes a rechargeable battery with 5-click On/Off manual operation, and a recessed fire button with LED. Other features include Safety Cut-off: if the firing button is pressed for more than 30 seconds, the battery will automatically turn off to prevent misfires.

Click on "Read More" for more details!
Read More

New at SmokTek - AGO G5 Dry Herb Vaporizer Kit

AGO G5 Dry Herb Vaporizer Clone Kit



The AGO G5 kit features an advanced vaporizing system capable of heating dry leaves on-the-go. The kit includes a 650mAh eGo battery with 5-click On/Off manual operation, 510 threading, a recessed fire button with a blue LED ring and a LCD screen which indicates remaining battery life. Other features include a ceramic heating chamber and mesh filter and screen to prevent the leaves from burning.

Click on "Read More" for more details!
Read More

New at SmokTek - EHPro Squape Rebuildable Atomizer - Stainless

EHPro Squape Clone - Rebuildable Atomizer - Stainless



The Squape is a great bottom-filling rebuildable atomizer for beginners and veterans alike! It is very durable, with stainless steel construction and polycarbonate windows, which allow you to see how much e-liquid remains at all times. Similar to the Kayfun, it is designed to optimize the flavor of your e-liquid. The wick and wire are housed inside a conical chamber which funnels the vapor straight up for your enjoyment, resulting in greatly enhanced flavor! However, unlike the Kayfun, the conical chamber attaches at the top instead of at the base of the atomizer - this means the Squape can be taken apart and rebuilt without having to drain the tank first.

Click on "Read More" for more details!
Read More

New at SmokTek - Stingray Mechanical Mod in 3 colors

Stingray Mechanical Mod Clone - Black Copper, Brass and Chrome


Absolutely gorgeous, the Stingray is a simple and very versatile bottom button mechanical mod! Available in copper coated in blackbrass or chrome, it comes with 18350, 18500 and 18650 extension tubes and accepts both button and flat top 1835018500 and 18650 protected and IMR batteries. The Stingray has a floating positive pin and a recessed 510 connector. To use with an eGo threaded device, you will need an eGo-510 adapter. The top and bottom contacts of the Stingray are silver-plated copper - this reduces voltage loss and ensures superior conductivity!

Click on "Read More" for more details!
Read More

New at SmokTek - EHPro Valkyrie Mechanical Hybrid Mod in Black

EHPro Valkyrie Clone - Mechanical Hybrid Bottom Button Mod - Black



The EHPro Valkyrie mechanical APV is a hybrid mod. In addition to its sleek ergonomic design which feel great in the hand, it features a built-in dripping atomizer that is permanently fused with the body of the mod. The atomizer has three posts - great for single or dual coil builds! The atomizer top cap is held securely in place by two rubber o-rings and also offers adjustable air flow.

Click on "Read More" for more details! 
Read More

New at SmokTek - EHPro Maraxus Telescoping Mechanical Mod in Black

EHPro Maraxus Clone - Telescoping Mechanical Mod - Black (body only) 



The EHPro Maraxus is a hard-hitting, uniquely designed mechanical mod that can be fully disassembled and configured in several ways according to taste! It is made of stainless steel and is machined extremely well. The flat top design has a recessed 510 connector and silver-plated copper contacts to reduce voltage loss. It also features a spring-loaded floating positive pin, which makes certain that any device you use with it will fit flush and look great!

Click on "Read More" for more details! 
Read More

New at SmokTek - EHPro Nemesis Mechanical Mod in Black

EHPro Nemesis Clone - Mechanical Bottom Button Mod - Black (body only)



Simple and very versatile bottom button design! The EHPro Nemesis mechanical APV accepts both button and flat top1835018500 and 18650 protected and IMR batteries. To use without a vapesafe fuse, you must remove the beauty ring on the main piece. This unit works great with the KICK. The Nemesis has a 510 recessed connector. The top and bottom contacts of the Nemesis are silver-plated to reduce voltage loss.

Click on "Read More" for more details!
Read More

New Kamry K1000 E-Pipe Kit Now Available at SmokTek

Just in time for Fathers Day! The New Kamry K1000 E-Pipe Kit is Available at SmokTek.com


The K1000 E-Pipe by Kamry is a sturdy mechanical mod that is compact, easy to use and offers great looks! The K1000 has a beautiful anodized finish that is practically smudge-proof. The K1000 has a 510 connector with a ring adapter and works great with all 510 threaded devices - it looks great with the Aspire Nautilus. To use it with eGo threaded devices like the AROor T-Dux, you will need an eGo-510 connector. The K1000 works with a single flat top 18350 or button top 18350 protected/IMR battery. The mechanical fire button is located at the top of the bowl of the unit and is quite comfortable to use.

Click on "Read More" for more details!
Read More

Local pickup now available at the SmokTek Retail Store

Good news! We are now allowing registered local customers to buy online and pickup from our retail store at 4201 62nd Ave. N. in Pinellas Park, FL.

If you have an account with is, all you need to do (one-time) is to request to be added to the "Local" group via our form on the SmokTek.com Contact Us page or email [email protected]. If you aren't registered with us yet, please create an account here, Add yourself to the LOCAL group, then email us at [email protected] to request to be activated. Simple and fast!

After you are added to the group, you will see a new shipping option at checkout that looks like this:
Read More

New Items at SmokTek

New Items List - more coming every week!
9/04: Express eGo 1100 kit in zip case
8/29: New Kanger ProTank-II is in!
8/09: iSmoka Mini and Mega with Silver base
8/05: New Rainbow Vision Spinner 1300 eGo battery
8/01: New colors of Spinner 400 and 1300 eGo batteries!
7/08: Kamry KTS Plus Chrome/Gold - (Flat Top)?
7/05: Innokin iTaste VV/VW 3.0 (awesome)
6/03: New iSmoka MINI BCC 1.6ml and iSmoka Coil Heads!
5/30: New iSmoka Mega BCC 3.5ml Tank Clearomizer
5/25: Sigelei TMAX Box Mod APV
5/22: Sigelei Telescoping Zmax in Stainless and Black
5/20: New Zmax MINI in Gun Metal!
5/02: The SID VW/VV APV is here!
4-25: Hooligan Vapes E-liquid! Juice with an Attitude.
4-14: Innokin iClear 30 2Ω in 5 new colors!
4-11: iClear 30 Coil Heads! (1.5 and 2.0 ohm in stock)

Read More

New ZMAX by Sigelei - Variable Voltage/Wattage with OLED Display

Just in! The ZMAX by Sigelei - Variable Voltage/Wattage with OLED Display

Sigelei ZMAX Variable Power, VV APV Kit - Stainless
The ZMAX Advanced Personal Vaporizer by Sigelei is sleek, powerful, reliable, full featured and very well built. With this new device, Voltage or Wattage is variable 3-6 volts or 3-15 watts respectively, using a single 18650 or two 18350 IMR batteries with the included extender cap. Check atomizer/carto resistance and battery voltage too!  
Rev. 3 Zmax has a menu item (#8) which enables you to switch between RMS and mean value voltage monitoring.  The RMS mode is more accurate because it samples the output voltage repeatedly while it is powering an atomizer or cartomizer.  It is with these measurements that it is able to adjust for heat related Voltage drift.
Read More

Innokin iTaste MVP 2600mAh Box APV Kit

Just in! The Innokin iTaste MVP 2600mAh Box APV Kit!

Innokin iTaste MPV Variable Voltage Box Mod at SmokTek.comThe new Innokin iTaste MVP is a variable voltage box style VV mod featuring long lasting 2600 mAh battery, outstanding build-quality and excellent performance.

 

The iTaste MVP lets you adjust voltages from 3.3 volts to 5 volts, comes with one of the most powerful batteries to be featured in a device. It's built-in lithium-ion polymer 2600 mAh also works like a power bank, so it will charge any USB or micro USB device as well as an iphone or ipad. The iTaste MVP uses a pass-through charging system, which means you can charge and vape at the same time.


MVP stands for “mobile variable power”. In my opinion, the iTaste MVP is also the “most valuable player” in all Innokin products...


Read More
More results: Previous Page 1... 8 9 10 11 12 13 Next Page
Sign Up for Our Newsletter
save 10% on your next order!
Subscribe to our Newsletter and save 10% on your next order!
TOP