Vapeonly vPipe II Bottom Changeable Coil Kit now at SmokTek
Posted by Marina on 11/28/2014 to
New Items at SmokTek.com
Vapeonly vPipe II Bottom Changeable Coil (BCC) Kit
The vPipe II by Vapeonly is a great-looking e-pipe modeled after authentic pipes. The vPipe II is automatic, which means there are no buttons to press each time you want to vape! This beautifully-designed mod feels great in the hand and features a red LED at the top of the bowl, which lights up each time you inhale. The device uses a bottom changeable coil system: the mouthpiece comes off to reveal an atomizer tank (1ml capacity), which houses the coil unit. In addition, the vPipe II offers several kinds of protection, including Short Circuit and Low Voltage protection.
- Automatic: no buttons to press!
- Bottom Changeable Coil - save money by changing only the coil
- Constant Voltage Output is 3.3V
- Short Circuit Protection: If a short circuit occurs, the LED will flash 3 times, which means the device has no voltage output
- Atomizer Protection: If you vape for more than 10 seconds at a time, the voltage will be cut down automatically and the LED will flash 10 times
- Low Voltage Protection: When voltage is below 3.3V, the LED will flash 10 times and the device will cease operation
- Battery Inversion Protection: If the battery is inserted incorrectly, the unit will not work to protect the circuit from damage
Please click on "Read More" for more details!
New Eleaf iStick 20W 2200mAh VV/VW APV Full Kit at SmokTek
Posted by Marina on 11/25/2014 to
New Items at SmokTek.com
Eleaf iStick 20W, 2200mAh VV/VW APV Kit
Small, but powerful, the iStick is an excellent option for those of you looking for a discreet, portable device. The iStick's high capacity 2200mAh lithium-ion battery will last a long time between charges. This mod allows you to adjust wattage between 2.0-20W and voltagebetween 3.0-5.5V in 0.1W/V increments, and has an easy to read OLED screen which displays your output power, atomizer resistance and battery life at a glance.
Features:
- 5-Click ON/OFF, 3-Click to switch between Volt and Watt Mode
- Variable Wattage: from 2.0 - 20.0 W in 0.1 watt increments
- Variable Voltage: from 3.0 - 5.5 V in 0.1 volt increments
- Minimum atomizer resistance is 1.0 ohms and Maximum atomizer resistance is 3.0 ohms
- 10-second Safety Cutoff: pressing the power button for more than 10 seconds will cause the device to shut off. The OLED screen will display "Over 10s"
- Short Circuit Protection: if an atomizer short occurs, the OLED will display "Atomizer Short"
- Low Voltage Protection: if battery voltage falls below 3.3V, the OLED screen will display "Lock." Once the battery voltage is above 3.65V, the low voltage protection will be unlocked
- Low Power Alert: if the battery power is at 10%, the power symbol on the screen will flash
The full kit includes an iStick, micro USB charge cable, wall adapter and eGo-510 adapter. Please click on "Read More" for a full description!
Just in at SmokTek - The Aspire ATLANTIS Sub Ohm Tank
Posted by Marina on 11/25/2014 to
New Items at SmokTek.com
Aspire Atlantis, 2ml Sub Ohm Coil, Pyrex (with airflow control)
The highly anticipated Aspire Atlantis offers the benefits of a Rebuildable Atomizer in the shape of a hassle-free replaceable coil tank system! Like the Aspire Nautilus line, it is made of stainless steel with a pyrex glass tank, allowing the use of any juice without fear of damaging the tank. It has 2ml capacity and is easy to fill or replace the coil.
The Aspire Atlantis features the NEW sub ohm coils from Aspire! In their performance, these coils rival that of rebuildable atomizers, offering fantastic flavor and tons of vapor!
Please click on "Read More" for more details!
Eleaf iStick 20W 2200mAh VV/VW APV now in at SmokTek
Posted by Marina on 11/24/2014 to
New Items at SmokTek.com
Eleaf iStick 20W, 2200mAh VV/VW APV (body only)
The Eleaf iStick is a compact, easy to use box mod that fits in the palm of your hand! Small, but powerful, the iStick is an excellent option for those of you looking for a discreet, portable device. The iStick's high capacity 2200mAh lithium-ion battery will last a long time between charges.
This mod allows you to adjust wattage between 2.0-20W and voltagebetween 3.0-5.5V in 0.1W/V increments, and has an easy to read OLED screen which displays your output power, atomizer resistance and battery life at a glance.
Features:
- 5-Click ON/OFF, 3-Click to switch between Volt and Watt Mode
- Variable Wattage: from 2.0 - 20.0 W in 0.1 watt increments
- Variable Voltage: from 3.0 - 5.5 V in 0.1 volt increments
- Minimum atomizer resistance is 1.0 ohms and Maximum atomizer resistance is 3.0 ohms
- 10-second Safety Cutoff: pressing the power button for more than 10 seconds will cause the device to shut off. The OLED screen will display "Over 10s"
- Short Circuit Protection: if an atomizer short occurs, the OLED will display "Atomizer Short"
- Low Voltage Protection: if battery voltage falls below 3.3V, the OLED screen will display "Lock." Once the battery voltage is above 3.65V, the low voltage protection will be unlocked
- Low Power Alert: if the battery power is at 10%, the power symbol on the screen will flash
Please click on "Read More" for a detailed description of the Eleaf iStick!
SmokTek eGo Automatic Battery with diamond accent end
Posted by Marina on 11/21/2014 to
New Items at SmokTek.com
SmokTek eGo auto battery - Black or Stainless
The battery has a 4-second cutoff and a "diamond" accented end with red LED. It works great with the Kanger E-smart BCC Clearomizer (it looks great with a gold DCT eGo cone), the Vision V. Pure and Redux Clearomizer. Please note that we do NOT recommend using Low Resistance (less than 2.0 ohm) atomizers or cartomizers on this unit! Their use will void Warranty. This battery performs best with single coil atomizers with a resistance of 2.0 ohm or above.
How to charge?
The battery can be charged with our eGo 420ma USB Charger or eGo 450ma USB Charger.
Please Note: To prevent possible damage, eGo batteries should only be charged with an eGo charger. Always fill your cartomizers or other devices while off the battery and check for leakage before using!
If e-liquid gets inside the battery, it will damage it. This will automatically void the Warranty.
New Efest IMR26650 4200mAh 3.7V 20A High Drain Battery at SmokTek
Posted by Marina on 11/19/2014 to
New Items at SmokTek.com
High Amp, Safe chemistry LiMN means no risk of venting with flame or explosion. Ideal for use in multiple cell applications. Great for sub-ohm builders!
Please note that due to their inherent safety, IMR cells don't have a protection circuit built in. They should never be discharged below 2.5 volts or cycle life/performance will be reduced. Maximum charge voltage is 4.25 volts.
Please note that due to their inherent safety, IMR cells don't have a protection circuit built in. They should never be discharged below 2.5 volts or cycle life/performance will be reduced. Maximum charge voltage is 4.25 volts.
Please check your cells with a volt meter during initial charging to be sure that your charger cuts off below this level, or cycle life will be reduced.
Please click on "Read More" for unit specifications!
eGo BDC Double Battery Kits at SmokTek make a great Xmas gift
Posted by Marina on 11/14/2014 to
New Items at SmokTek.com
SmokTek eGo BDC 1100 / 650 E-Cigarette Kit in Zipper Case - Black and Stainless
The eGo BDC kit is a low cost, large capacity starter kit that is rechargeable and refillable! The kit comes with two complete units and carry case. We make this kit available so you can try a quality Personal Vaporizer without spending a lot - it also makes a great gift for a smoking friend or family member!
The Bottom Dual Changeable Coil (BDC) Clearomizers in this kit hold 1.6ml of e-liquid to keep you going for a long time on one fill. Each clearomizer has a removable drip tip and comes pre-installed with a 2.0 ohm (+/- .2 ohms) bottom dual coil head. Dual coils provide excellent flavor and vapor production.
This device outperforms the smaller e-cigs considerably, it will not disappoint you!
Please click on "Read More" for more information!
The eGo BDC kit is a low cost, large capacity starter kit that is rechargeable and refillable! The kit comes with two complete units and carry case. We make this kit available so you can try a quality Personal Vaporizer without spending a lot - it also makes a great gift for a smoking friend or family member!
The Bottom Dual Changeable Coil (BDC) Clearomizers in this kit hold 1.6ml of e-liquid to keep you going for a long time on one fill. Each clearomizer has a removable drip tip and comes pre-installed with a 2.0 ohm (+/- .2 ohms) bottom dual coil head. Dual coils provide excellent flavor and vapor production.
This device outperforms the smaller e-cigs considerably, it will not disappoint you!
Please click on "Read More" for more information!
Samsung INR18650-25R 2500mAh 25A High Drain Hybrid IMR Battery
Posted by Marina on 11/14/2014 to
New Items at SmokTek.com
Safe for sub-ohm and/or microcoil builds. These batteries have been tested for safety under extreme stress.
Safe chemistry NCA means no risk of venting with flame or explosion. Ideal for use in multiple cell applications. For use with high current this battery can deliver more capacity at a higher voltage than 3100 mAh cells.
Please note that due to their inherent safety, IMR cells don't have a protection circuit built in. They should never be discharged below 2.5 volts or cycle life/performance will be reduced. Maximum recommended charge voltage is 4.17V - 4.20V volts. Please check your cells with a volt meter during initial charging to be sure that your charger cuts off below this level, or cycle life will be reduced.
Please note that due to their inherent safety, IMR cells don't have a protection circuit built in. They should never be discharged below 2.5 volts or cycle life/performance will be reduced. Maximum recommended charge voltage is 4.17V - 4.20V volts. Please check your cells with a volt meter during initial charging to be sure that your charger cuts off below this level, or cycle life will be reduced.
Please click on "Read More" for more details!
Check out the ZNA 50 Variable Power 50Watt APV now at SmokTek
Posted by Marina on 11/11/2014 to
New Items at SmokTek.com
The ZNA 50 Advanced Personal Vaporizer replica is a powerful, easy to use variable wattage device with a unique look! A hybrid between a tube and a box mod, this APV feels great in the hand. It is made of stainless steel and allows you to adjust wattage between 7-50W in 0.1W increments.
The ZNA 50 features an adjustable 510 connector, which will ensure that any device you put on it will fit flush. With up to 50W of power, this APV is able to run practically any device, from Clearomizers and Clearomizer Tanks to Rebuildables. To run eGo-threaded devices on this APV, you will need an eGo-510 connector; for 808 devices, you will need an 808-510 adapter.
The ZNA 50 has an easy to read LED screen that displays your watt/volt output, atomizer resistance and battery life at a glance. The device can be Locked to prevent misfires, or set in Stealth or Power Locked mode for ease of vaping. In addition, the ZNA 50 offers Short Circuit and Reverse Battery protection.
This unit uses a single 18500 IMR battery OR a single 18650 IMR battery (when using the included extension tube.)
Please click on "Read More" for more details on this mod!
Sign Up for Our Newsletter
save 10% on your next order!