Kanger Mini ProTank-3 How To
Posted by Marina on 7/31/2014 to
Help for Newbies
Love the Kanger ProTank-3, but need a smaller clearomizer to go with your eGo battery? The Kanger Mini ProTank-3 is the smaller version of the Kanger ProTank-3 and offers all of the same benefits in a more compact 1.5ml size! Check out Geri X's quick tutorial on how to fill and change the coil head on the Kanger Mini ProTank-3!
Click on "Read more" to watch the video.
New at SmokTek - Automatic Twist Variable Voltage eGo 1100mAh Battery
Posted by Marina on 7/26/2014 to
New Items at SmokTek.com
SmokTek Automatic Twist - Variable Voltage 1100mAh eGo Battery
Like the Vision Spinner, it uses smart buck-boost converter technology, which allows you to adjust voltage output from 3.3v ~ 4.8v by spinning the knurled dial at the bottom. Regulated voltage output remains stable as battery is depleted.
Click on "Read More" for more details!
New at SmokTek - Kamry Robot V Mechanical Mod
Posted by Marina on 7/25/2014 to
New Items at SmokTek.com
Kamry Robot V Mechanical Mod (body only)
The Robot V by Kamry is a great-looking, durable and very reliable mechanical mod! It is machined extremely well and feels great in the hand. Reminiscent in looks to Innokin's iTaste 134, it can be fully disassembled for cleaning. This unit features a 510/eGo connector and a spring-loaded bottom firing button.It accepts button top 18650 protected and IMR batteries (it will not work with a flat top 18650 battery without a Flat Top Battery Adapter). It works great with the Smok Kick Adapter! Please note that the Robot V will work with an 18500 battery if used in conjunction with a Smok Kick Module.
Click on "Read More" for more details!
New at SmokTek - Efest Purple IMR18650 2500mAh 3.7V 35A High Drain Battery
Posted by Marina on 7/24/2014 to
New Items at SmokTek.com
Efest Purple IMR 18650 2500mAh 3.7V 35A High Drain Battery - Button Top (single)
Safe for sub-ohm and/or microcoil builds. These batteries have been tested for safety under extreme stress.Safe chemistry LiMN means no risk of venting with flame or explosion. Ideal for use in multiple cell applications.
Please note that due to their inherent safety, IMR cells do not have a protection circuit built in. They should never be discharged below 2.5 volts or cycle life/performance will be reduced. Maximum recommended charge voltage is 4.17V - 4.20V volts. Please check your cells with a volt meter during initial charging to be sure that your charger cuts off below this level, or cycle life will be reduced.
Click on "Read More" for more details!
New at SmokTek - Savory Pipe SmokEjuice, Premium Organic E-Liquid
Posted by Marina on 7/19/2014 to
New Items at SmokTek.com
Savory Pipe SmokEjuice - Premium Organic E-Liquid, Made in the U.S.A.
A sumptuous, well-balanced blend of tobacco and spices, with hints of clove and cinnamon!Available in 5 nic levels (including 0 nic) and 3 sizes!
Premium Organic E-Liquid made with the highest quality, USP food grade PG/VG (80/20%) and alcohol based organic flavorings. Taste the difference!
If you were looking for a new e-juice to use with your pipe mod - like the Kamry K1000 E-Pipe - give this one a try!
New at Smoktek - AGR Cartomizer Tank - Polished Stainless
Posted by Marina on 7/15/2014 to
New Items at SmokTek.com
AGR Cartomizer Tank - Polished Stainless
The AGR Cartomizer Tank by Youde has been around for a while for a reason - it is a very user-friendly tank, designed for use with Boge cartomizers (standard and XXL sizes), but will work with Smok standard and XL cartomizerswithout a flange. The AGR features polished stainless steel construction and polycarbonate tank tubes, a locking base and hassle-free re-filling!
The AGR Cartomizer Tank by Youde has been around for a while for a reason - it is a very user-friendly tank, designed for use with Boge cartomizers (standard and XXL sizes), but will work with Smok standard and XL cartomizerswithout a flange. The AGR features polished stainless steel construction and polycarbonate tank tubes, a locking base and hassle-free re-filling!Click on "Read More" for more details!
New at SmokTek - PAX-II Dry Herb Vaporizer Kit
Posted by Marina on 7/14/2014 to
New Items at SmokTek.com
PAX-II Dry Herb Vaporizer Clone Kit
The PAX-II kit features an advanced vaporizing system capable of heating dry leaf on-the-go. The kit includes a rechargeable battery with 5-click On/Off manual operation, and a recessed fire button with LED. Other features include Safety Cut-off: if the firing button is pressed for more than 30 seconds, the battery will automatically turn off to prevent misfires.
The PAX-II kit features an advanced vaporizing system capable of heating dry leaf on-the-go. The kit includes a rechargeable battery with 5-click On/Off manual operation, and a recessed fire button with LED. Other features include Safety Cut-off: if the firing button is pressed for more than 30 seconds, the battery will automatically turn off to prevent misfires.
Click on "Read More" for more details!
New at SmokTek - AGO G5 Dry Herb Vaporizer Kit
Posted by Marina on 7/10/2014 to
New Items at SmokTek.com
AGO G5 Dry Herb Vaporizer Clone Kit
The AGO G5 kit features an advanced vaporizing system capable of heating dry leaves on-the-go. The kit includes a 650mAh eGo battery with 5-click On/Off manual operation, 510 threading, a recessed fire button with a blue LED ring and a LCD screen which indicates remaining battery life. Other features include a ceramic heating chamber and mesh filter and screen to prevent the leaves from burning.
The AGO G5 kit features an advanced vaporizing system capable of heating dry leaves on-the-go. The kit includes a 650mAh eGo battery with 5-click On/Off manual operation, 510 threading, a recessed fire button with a blue LED ring and a LCD screen which indicates remaining battery life. Other features include a ceramic heating chamber and mesh filter and screen to prevent the leaves from burning.
Click on "Read More" for more details!
New at SmokTek - EHPro Squape Rebuildable Atomizer - Stainless
Posted by Marina on 7/9/2014 to
New Items at SmokTek.com
EHPro Squape Clone - Rebuildable Atomizer - Stainless
The Squape is a great bottom-filling rebuildable atomizer for beginners and veterans alike! It is very durable, with stainless steel construction and polycarbonate windows, which allow you to see how much e-liquid remains at all times. Similar to the Kayfun, it is designed to optimize the flavor of your e-liquid. The wick and wire are housed inside a conical chamber which funnels the vapor straight up for your enjoyment, resulting in greatly enhanced flavor! However, unlike the Kayfun, the conical chamber attaches at the top instead of at the base of the atomizer - this means the Squape can be taken apart and rebuilt without having to drain the tank first.
The Squape is a great bottom-filling rebuildable atomizer for beginners and veterans alike! It is very durable, with stainless steel construction and polycarbonate windows, which allow you to see how much e-liquid remains at all times. Similar to the Kayfun, it is designed to optimize the flavor of your e-liquid. The wick and wire are housed inside a conical chamber which funnels the vapor straight up for your enjoyment, resulting in greatly enhanced flavor! However, unlike the Kayfun, the conical chamber attaches at the top instead of at the base of the atomizer - this means the Squape can be taken apart and rebuilt without having to drain the tank first.
Click on "Read More" for more details!
New at SmokTek - Stingray Mechanical Mod in 3 colors
Posted by Marina on 7/8/2014 to
New Items at SmokTek.com
Stingray Mechanical Mod Clone - Black Copper, Brass and Chrome
Absolutely gorgeous, the Stingray is a simple and very versatile bottom button mechanical mod! Available in copper coated in black, brass or chrome, it comes with 18350, 18500 and 18650 extension tubes and accepts both button and flat top 18350, 18500 and 18650 protected and IMR batteries. The Stingray has a floating positive pin and a recessed 510 connector. To use with an eGo threaded device, you will need an eGo-510 adapter. The top and bottom contacts of the Stingray are silver-plated copper - this reduces voltage loss and ensures superior conductivity!
Click on "Read More" for more details!
New at SmokTek - EHPro Valkyrie Mechanical Hybrid Mod in Black
Posted by Marina on 7/8/2014 to
New Items at SmokTek.com
EHPro Valkyrie Clone - Mechanical Hybrid Bottom Button Mod - Black
The EHPro Valkyrie mechanical APV is a hybrid mod. In addition to its sleek ergonomic design which feel great in the hand, it features a built-in dripping atomizer that is permanently fused with the body of the mod. The atomizer has three posts - great for single or dual coil builds! The atomizer top cap is held securely in place by two rubber o-rings and also offers adjustable air flow.
The EHPro Valkyrie mechanical APV is a hybrid mod. In addition to its sleek ergonomic design which feel great in the hand, it features a built-in dripping atomizer that is permanently fused with the body of the mod. The atomizer has three posts - great for single or dual coil builds! The atomizer top cap is held securely in place by two rubber o-rings and also offers adjustable air flow.
Click on "Read More" for more details!
New at SmokTek - EHPro Maraxus Telescoping Mechanical Mod in Black
Posted by Marina on 7/8/2014 to
New Items at SmokTek.com
EHPro Maraxus Clone - Telescoping Mechanical Mod - Black (body only)
The EHPro Maraxus is a hard-hitting, uniquely designed mechanical mod that can be fully disassembled and configured in several ways according to taste! It is made of stainless steel and is machined extremely well. The flat top design has a recessed 510 connector and silver-plated copper contacts to reduce voltage loss. It also features a spring-loaded floating positive pin, which makes certain that any device you use with it will fit flush and look great!
The EHPro Maraxus is a hard-hitting, uniquely designed mechanical mod that can be fully disassembled and configured in several ways according to taste! It is made of stainless steel and is machined extremely well. The flat top design has a recessed 510 connector and silver-plated copper contacts to reduce voltage loss. It also features a spring-loaded floating positive pin, which makes certain that any device you use with it will fit flush and look great!
Click on "Read More" for more details!
New at SmokTek - EHPro Nemesis Mechanical Mod in Black
Posted by Marina on 7/7/2014 to
New Items at SmokTek.com
EHPro Nemesis Clone - Mechanical Bottom Button Mod - Black (body only)
Simple and very versatile bottom button design! The EHPro Nemesis mechanical APV accepts both button and flat top18350, 18500 and 18650 protected and IMR batteries. To use without a vapesafe fuse, you must remove the beauty ring on the main piece. This unit works great with the KICK. The Nemesis has a 510 recessed connector. The top and bottom contacts of the Nemesis are silver-plated to reduce voltage loss.
Simple and very versatile bottom button design! The EHPro Nemesis mechanical APV accepts both button and flat top18350, 18500 and 18650 protected and IMR batteries. To use without a vapesafe fuse, you must remove the beauty ring on the main piece. This unit works great with the KICK. The Nemesis has a 510 recessed connector. The top and bottom contacts of the Nemesis are silver-plated to reduce voltage loss.
Click on "Read More" for more details!
Sign Up for Our Newsletter
save 10% on your next order!