New at SmokTek - EHPro Kryptonite Mechanical Mod

EHPro Kryptonite

The Kryptonite by EHPro is a massive, well-built, hard-hitting mechanical mod! It is made of brass with stainless steel accents and is machined extremely well. It features flat top design and feels great in the hand. The Kryptonite has a recessed 510 connector and silver-coated copper contacts to reduce voltage loss. It also features a spring-loaded positive pin, which makes certain that any device you use with it will fit flush and look great! 

The Kryptonite is a 26650 mod and works with both button and flat top 26650 protected and IMR batteries. However, each unit includes a delrin tube which makes it possible to run this stunning mod on a 18650 battery.

Click on "Read More" for more details!

Read More

New at SmokTek - EHPro 26650 Cronus Telescoping Mechanical Mod

EHPro 26650 Cronus

The 26650 Cronus by EHPro is simple, well-built, hard-hitting - and massive! It is made of stainless steel and is machined extremely well. It features flat top design and feels great in the hand. The EHPro 26650 Cronus has a recessed 510 connector and pure silver inlaid in copper (top) and brass (bottom) contacts to reduce voltage loss. It also features a floating positive pin, which makes certain that any device you use with it will fit flush and look great! The EHPro 26650 Cronus works with both button and flat top 26650 protected and IMR batteries. 

Click on "Read More" for more details!

Read More

New at SmokTek - Kanthal Pre-built Coils

Kanthal Pre-built Coils (5-pack)


These pre-built coils are great for vapers who are new to rebuilding or for those who prefer the convenience of pre-made coils! 

All coils are made with 24 gauge kanthal wire and are available in 0.3 ohm, 0.5 ohm, and  0.8 ohm. Sold in 5-packs.

Please note that these coils are not pre-torched. Silica wick and SS woven mesh available separately.
Read More

New at SmokTek - IGO-W6 Rebuildable Dripping Atomizer


The IGO-W6 by Youde is a stainless, sealed 510 connection, rebuildable dripping atomizer. The IGO-W6 features adjustable airflow. Simply twist the brass control ring to adjust airflow. There are two types of airflow holes to accommodate different builds (four slots and two sets of double round holes).  

Click on "Read More" for more details!
Read More

New at SmokTek - Tool Kit for Rebuildables

Tool Kit 


Like the Ceramic Tip Tweezers, this small, portable tool kit by Youde is a great item for rebuilders! It includes all the basic tools needed for rebuilding coils.

Each Tool Kit includes: Collapsible miniature scissors, Tweezers, Miniature dual-ended screwdriver (phillips/flat head), Micro-fiber polishing cloth, and a Nice carry case.
Read More

New at SmokTek - IGO-W7 Rebuildable Dripping Atomizer - Stainless


The IGO-W7 by Youde is an all stainless, sealed 510 connection, rebuildable dripping atomizer. This RDA offers unconventional looks and features adjustable airflow. The unique, ergonomic design of the airflow control ring makes it very easy to use - simply grip and twist to achieve your desired airflow slot size.   

Please click on "Read More" for more details!
Read More

New at SmokTek - Ceramic Tip Tweezers

Ceramic Tip Tweezers


These tweezers are an indispensable tool for all vapers who prefer building their own coils! They are constructed out of stainless steel and are chemically resistant, anti-magnetic and non-conductive. They feature heat-resistant pointed ceramic tips, which enable you to create tighter coils right on the building deck of your RBA while the unit is being fired (without the fear of creating a short).

Click on "Read More" for more details!
Read More

New at SmokTek - AGA-T5 Rebuildable Atomizer - Stainless

AGA-T5 RBA

The AGA-T5 by Youde is a durable stainless steel rebuildable atomizer! It features a pyrex glass tube with 1.5ml capacity, but like the AGA-T7, it can hold up to 3.5ml of e-liquid altogether when including the juice contained in the chimney section and your wick/cotton. Similar to the Kayfun, it is designed to optimize the flavor of your e-liquid. The wick and wire are housed inside a chimney chamber which funnels the vapor straight up for your enjoyment, resulting in greatly enhanced flavor and lots of vapor! 

The brass top cap comes off to reveal a fill hole, sealed by a grub screw - simply unscrew the grub screw using the included hex key when you need to re-fill with e-liquid. The AGA-T5 allows you to work on your coil by simply removing the base and without having to drain any e-liquid from the tank first. In addition, this RBA features an airflow control ring at the base.

Click on "Read More" for more details!
Read More

New at SmokTek - AGA-T7 Rebuildable Atomizer - Stainless

AGA-T7 RBA

The AGA-T7 by Youde is a durable stainless steel rebuildable atomizer. It features a pyrex glass tube with 1.5ml capacity, but can hold up to 3.5ml of e-liquid altogether when including the juice contained in the chimney section and your wick/cotton. Similar to the Kayfun, it is designed to optimize the flavor of your e-liquid. The wick and wire are housed inside a chimney chamber which funnels the vapor straight up for your enjoyment, resulting in greatly enhanced flavor and lots of vapor! The top cap features a fill hole, which is sealed by a grub screw - simply unscrew the grub screw using the included hex key when you need to re-fill with e-liquid. In addition, the AGA-T7 features an airflow control ring and juice catcher at the base.

Click on "Read More" for more details!
Read More

New at SmokTek - UDT-V14 Mechanical Mod - Brushed Bronze

UDT-V14

The UDT-V14 by Youde is a reliable, sturdy mechanical mod with a great retro look to it! It is made of brass with a brushed bronze finish and features stainless steel accents - it is machined extremely well. The top cap has three grooved channels for airflow, and the body of the mod features two vent holes. The UDT-V14 has a recessed 510 connector and silver-plated copper contacts to reduce voltage loss. 

It also features an adjustable floating center pin, which makes certain that any device you use with it will fit flush and look great! The UDT-V14 works with both button and flat top 18350 and 18650 protected and IMR batteries. It also works great with an 18500 battery when used with the KICK

Click on "Read More" for more details on this great-looking mech mod!

Read More

New at SmokTek - ARO Winder VV/VW 1500mAh eGo Battery - Woodgrain

ARO Winder Variable Wattage eGo Battery - Woodgrain


Now available in attractive light and dark woodgrain finishes! The ARO Winder style VV/VW battery is the latest variable voltage or wattage eGo battery made by SmokTech. At 1500mAh, this is a large capacity battery that will last a long time between charges. Unlike most eGo batteries, the firing button is recessed and very comfortable to use. This battery uses smart technology which allows you to adjust voltage output from 3.2v ~ 4.8v or wattage from 4w-12w by spinning the knurled dial at the bottom.  It is 510/eGo threaded and works great with most 510/eGo devices, including the ARO BCC and ARO Pyrex BCC Clearomizer. Regulated voltage output remains stable as battery is depleted. 

This battery has improved circuitry providing better reliability and greater protection. 5 clicks of the button will power your battery on and off, 3 clicks of the button will change between VV and VW modes. Very easy to use! 

Click on "Read More" for more details!
Read More

New at SmokTek - Black Licorice SmokEjuice, Premium Organic E-Liquid

Black Licorice SmokEjuice - Premium Organic E-Liquid, Made in the U.S.A.

Black Licorice SmokEJuiceIf you enjoy the unique taste of licorice, you will love our balanced, bitter-sweet blend of black licorice with hints of aniseed!

Premium Organic E-Liquid made with the highest quality, USP food grade PG/VG (80/20%) and alcohol based organic flavorings. Taste the difference!
Read More

SmokTek Video Testimonial Contest with 3 Winners

Hi everyone!

Vaping has had a profound effect on all of our lives here at SmokTek – from all the positive changes to the health of our employees and customers, to the surprising thrills of acquiring the latest devices and finding more delectable e-liquids to try. It’s a full-blown lifestyle for us! How about you? We would like to collect your testimonials to further showcase the many benefits of vaping as a legitimate alternative to smoking!

SmokTek is offering the chance to win a sweet new set-up OR a $135 Gift Certificate by simply answering the question: How has vaping changed your life?

It’s super easy to enter the contest: simply create a short 2-3 minute video about how vaping has changed your life and upload it on YouTube! It can be fun and humorous or heart-felt and serious; it can be in the shape of a testimonial, a song, a skit, a slide show or even animation – you can be as creative as you like!

Please click on "Read More" for more details and Good Luck!! J

UPDATE: The SmokTek Video Testimonial Contest has been retired for the time being due to lack of participation. We would love to run it again in the future, so keep an ear out for such an announcement some time soon. 

Thanks for reading and remember - breathe life, your way!J

Read More

New at SmokTek - Aspire Nautilus Bottom Vertical Coil Replacement Head

Aspire Nautilus Bottom Vertical Coil (BVC) Replacement Head

Available in 1.6Ω and 1.8Ω (+/- .2) resistance.

These are replacement bottom vertical coil heads for the Aspire Nautilus Mini BVC pyrex glass tank, but are also compatible with the full-sized Aspire Nautilus

The BVC coils are unique because instead of a wick, they feature a vertical coil wrapped inside ceramic cloth. BVC coils improve on the original Aspire Nautilus bottom dual coils by providing even better flavor and vapor, as well as having a longer lifecycle. 

Click on "Read More" for more details!
Read More

New at SmokTek - Acrylic Display for Mods and eGo batteries

Acrylic Display for Mods and eGo Batteries, Style 8

This acrylic display is a great way to show off your collection of mods and eGo batteries! It features 8 slots to display your mechanical or VV/VW devices. The center hole is an impressive 48.5mm (1.91") and is large enough to accommodate extra-large devices like the Dreadnaut. 

Click on "Read More" for more details!
Read More
More results: 1 2 3 4 5 6 7 ...13 Next Page
Sign Up for Our Newsletter
save 10% on your next order!
Subscribe to our Newsletter and save 10% on your next order!
TOP