iStick 30W, 2200mAh Variable Volt/Variable Watt APV Full Kit by Eleaf
The upgraded version of the popular Eleaf iStick 20W, this is the same great device - now with more power capable of supporting sub ohm coils! The Eleaf iStick 30W is a compact, easy to use box mod that fits in the palm of your hand. Small, but powerful, the iStick is an excellent option for those of you looking for a discreet, portable device. The iStick's high capacity 2200mAh lithium-ion battery will last a long time between charges. This mod allows you to adjust wattage
in 0.1W/V increments, and has an easy to read OLED screen which displays your output power, atomizer resistance and battery life at a glance.
This upgraded version of the iStick features a spring-loaded
510 connection and an enlarged top cap
- the device can now handle all of your 22mm atomizers, like the Aspire Atlantis
, with no over-hang! The iStick is compatible with most 510 atomizers on the market. It is a perfect match for the Aspire Nautilus 5ml tank
, for a compact and long-lasting set-up. Read more about why the iStick 30W and Aspire Nautilus make a great pairing here
To use the iStick with eGo-threaded atomizers like the Kanger Mini ProTank-3
, you will need to attach the included eGo-510 adapter. To run 808-threaded atomizers on this device, you will need an 808-510 adapter
Using the iStick 30W is easy. To turn the unit on, press the square firing button 5 times. To switch between Voltage and Wattage mode, click the firing button 3 times. Using the triangular up and down buttons, you can set the device to your preferred volt or watt setting in 0.1V/W increments. Long-press either the up or down button to enter into AUTO mode: pressing either button in this mode will increase the speed of adjusting power by 0.2V/W or 0.5V/W. The iStick 30W offers 10-second cutoff, Short Circuit and Low Voltage protection. The mod can also now be Locked to prevent accidentally changing your volt/watt settings: simply hold the up and down buttons for 2 seconds at the same time to Lock or Unlock the iStick!
The iStick 30W can be charged through the USB port on the bottom using the included micro USB charge cable. The iStick can be used as a Pass-though device, allowing you to vape while you charge. To charge the unit, plug the micro USB charger into the iStick and into any USB port (or, if using with a Wall Adapter, plug into a wall outlet.)
- 5-Click ON/OFF, 3-Click to switch between Volt and Watt Mode
- Variable Wattage: from 5.0 - 30.0 W in 0.1 watt increments
- Variable Voltage: from 2.0 - 8.0 V in 0.1 volt increments
- Minimum atomizer resistance is 0.4 ohms and Maximum atomizer resistance is 5.0 ohms
- 10-second Safety Cutoff: pressing the power button for more than 10 seconds will cause the device to shut off. The OLED screen will display "Over 10s"
- Short Circuit Protection: if an atomizer short occurs, the OLED will display "Atomizer Short"
- Low Voltage Protection: if battery voltage falls below 3.3V, the OLED screen will display "Lock." Once the battery voltage is above 3.7V, the low voltage protection will be unlocked
- Low Power Alert: if the battery power is at 10%, the power symbol on the screen will flash
- Lock Mode: to prevent accidentally changing your volt/watt settings, press the up and down buttons at the same time for 2 seconds to Lock (or Unlock) the device. The OLED screen will display "Lock" if the unit is locked
1 x iStick 30W
1 x eGo-510 adapter
1 x Micro USB Charge Cable
1 x Wall Adapter
1 x User Manual
1 x Simple storage box to store when not in use
Pick up a lanyard to keep your iStick handy!
Size: Length 75mm (2.95") / Width 20mm (0.78") / Diameter 32mm (1.25")
Our standard 30 day warranty covers defective product.